鉆探抽沙船浮體雙體結構單體長55米，寬2.1米，高1.25米：底板、側板采用6毫米鋼板，面板采用4毫米防滑板，浮體內部每間隔60毫米采用槽鋼、角鋼雙層骨架焊接，防銹采用防銹油漆處理。挖斗配用145個，挖斗為方斗，挖斗容積為0.06立方米，挖斗底板采用10毫米鋼板，圍板采用6毫米鋼板，斗唇采用15毫米錳鋼。鏈條采用普鋼制造，磨損部位采用45鋼高頻熱處理（注：磨損部位可以更換），鏈條長760毫米，寬90毫米，高40毫米。
Drilling pumping sand floating body dimer structure monomer 55 meters long, 2.1 meters wide, 1.25 meters high, bottom plate, side plates with 6 mm steel plate, panel with 4 mm anti slide, floating body at intervals of 60 mm with channel steel, angle steel double deck frame welding, rust with rust proof paint processing. Digging bucket equipped with 145, the bucket to bucket, bucket capacity of 0.06 cubic meters, the bucket bottom plate with 10 mm steel plate, hoarding by 6 mm steel plate, with 15 mm steel bucket lip. The chain using Pu steel manufacturing, wear parts using 45 steel high frequency heat treatment (Note: wear parts can be replaced), the chain length of 760 mm, 90 mm wide, 40 mm high. |
.jpg)
